Skip to content
English
More support Sign in
Contact us
  • There are no suggestions because the search field is empty.

Epson Printer Installation

Search

Epson Printer Installation

  1. New EPSON printers usually come with a default IP i.e. 192.168.192.168
  2. Add this IP through the server's Network configuration
  3. Next, go to EPSON TMNet Config
  4. The printer's IP can be set within here, as well
  5. Access the printer via the web (type the IP address within the web address bar)
  6. Disable the set PING (IP will no longer be configurable via TMNet, but also won't allow IP to change)
  7. Do the "Reset" after settings are changed

To tie a printer to a terminal

  1. Go to the SP_Admin
  2. Settings > Control Panel
  3. Choose which terminal needs the printer
  4. The two settings needing to be changed: cashDrawerName & ReceiptPrinterName
  5. The name of the two settings i.e. posDrawer2 & SharedPrinter2

OPOS Settings (Middleman for ClubSpeed to Printer)

  1. If there is not a printer related to a cash drawer (posDrawer2 ->SharedPrinter2) then the cash drawer will be unable to be "talked" too.
  2. Printer - Add a new device via button
  3. Select TM-T88IIIM
  4. Model: TM-T88IIIME
  5. Logical Device Name: SharedPrinter2
  6. Network: 172.0.43.27 (this is subject to change)
  7. Click the Update button
  8. Click Finish

Drawer - Add a new device via button

  1. Select Standard
  2. Model: StandardE
  3. Logical Device Name: posDrawer2
  4. Network: same IP as related to the printer
    1. Ensure Communication Settings are: High & 2 (under the Device Specific Settings)
  5. Click Finish > OK

*If the drawer is having receipt printer connection issues, and you have tried everything else, ensure it is Epson compatible.

If someone cannot connect to the printer

  1. Than this "Reset" function can be used
  2. OR Go to the task manager
  3. Ask them to turn the printer off and than logoff session(s) (possibly more than one)
  4. Then have them turn the printer back on and have them re-login

*Notes on Printer Options

  1. Logo is in the controlpanel with the settingName "CompanyLogoPath". This is the path of the image, must be 2-bit monochrome, otherwise receipt printer errors out

 TM-m30 - Admin portal log on

  1. If you are installing a TM-m30, you might need to log onto the web portal to adjust settings. If you do, it is password protected. Below are the default credentials to use:
  • User: epson
  • Password: epson

(See Document for Images)

docx (468 KB)

Related Articles